Carpet padding and a hardwood floor indeed make an excellent combination for flooring as long as the carpet does not seem dusty in its appearance. Once the carpet starts appearing dull, it’s time to remove it and refinish the hardwood flooring underneath it.
Supposedly, you initially installed carpet padding on your hardwood floor to ensure the safety of the hardwood and to procure your space a reformed look. But now that the carpet has grown rusty and old, you want to remove old carpet padding from the hardwood floor.
We are all in favor of your proceeding with this thought because just by removing the carpet padding layering from the surface of the hardwood floor, you can have brand new flooring right at your immediate disposal.
Though if you are concerned about how to remove old carpet padding from hardwood floors, fret not because in this article, we will address this concern of yours by stating an effective method to be undertaken.
How To Remove Old Carpet Padding From Hardwood Floors?
If you have the time and the energy to take the procedure up by yourself, then rest assured there will be no need for you to hire an expert professional in the area to do the job for you. This way, you will save some extra bucks to be spent and utilized elsewhere.
Many readily available solvents in the market will help you in this task of yours and assist you with convenience, so without any more delay, let’s move on to the effective method that we have in store for you today.
Star Product Recommendation:
Before delving into further detail of the step-by-step guide for removing old carpet padding from hardwood floors, we would like to introduce the star product for today’s discussion.
Our star product for you is a one-stop solution to all your worries and, in fact, a very efficient and successful solvent for how to remove old carpet padding from hardwood floors.
The best option for a solvent that resolves all the remaining carpet padding on the hardwood floors is denatured alcohol. To state it in layman’s terminology, denatured alcohol is simply ethanol that is the most practical and fruitful choice for a solution for disinfecting, sterilizing, cleaning, etc.
Our recommendation for the day of denatured alcohol is the Klean-Strip Green Denatured Alcohol. The manufactured solution by Klean-Strip Green is guaranteed to work exceptionally to dissolve any constituents of glue leftover from your carpet paddings on the hardwood flooring.
The denatured alcohol performs its function by loosening and softening the glue, making it easy and less challenging to scrap off, and then cleaning the surface with soapy water as a preventive measure to ensure nothing of the carpet padding remains anymore on the hardwood surface.
Klean-Strip Green’s denatured alcohol comes only bringing good news with itself. Upon using the solvent, customers reported that while the denatured alcohol effectively removed the glue, it also removed the marks of the carpet padding on the hardwood.
A most distinct quality of our recommendation is that, unlike the conventional denatured alcohol, Klean’s denatured alcohol is 100% safe for your hardwood floors, and the removal of the carpet padding will not come costing you damage to the timber being cleansed.
In the following section, we state all the crucial steps you must abide by if you want to know the effective method, and essentially the key secret for removing old carpet padding from hardwood floors.
It is advisable that beforehand, and once you have not started working on how to remove old carpet padding from hardwood floors, you grab all the necessary and required pieces of equipment that could come in handy during the task.
You may need a:
- Staple Remover
- Klean-Strip Green Denatured Alcohol
- Scraper- sandpaper or a putty knife
- Cleaning solution
Step#1: Ridding Of The Staples
The first and foremost step that has to be taken when undertaking the task of how to remove old carpet padding from hardwood floors is to begin by removing all the staples surrounding the carpet padding.
Staples are usually placed near the perimeters of the paddings, so look around and near those areas, and you shall spot all the staples. After identifying the staples attached to the carpet padding, it’s time to detach them. You will do this by grabbing onto a section of the carpeted surface and pulling the area by hand with force.
To make sure that the removal of staples goes safely and meanwhile, during the work, you do not end up sustaining an injury, use some rubber or leather gloves that you have. Also, wear a face mask so that by accident, you do not end up inhaling any dust particles being released during the stapling removal process.
However, if you think you cannot manage the carpet padding’s surface area, cut down the padding into small and easily manageable sections using a sharp knife.
Now it’s time to get to the real and the most critical chore of how to remove old carpet padding from hardwood floors. This process mainly requires the most effort by your side and, of course, vigilance, too, because even if you bat your eye for a second longer, there is a likely chance of skipping out on an area’s scrapping.
At this point, the carpet padding is out of the picture, and all your focus is now on scrapping the hardwood floor to remove any remaining residue. The residue can be in glue, carpet pieces, or even rug marks.
Whatever it may be with you making the correct use of a putty knife or sandpaper, all of it can be gone within a few hours of consistent scrapping. Nevertheless, while you are at scrapping the hardwood floor, be mindful not to scrape too vigorously as then you can add scratches to the timber while removing for glue and other constituents.
Don’t worry about getting everything out of the hardwood’s way because there is another step to be followed which will take care of it.
Step#3: Denatured Alcohol
Here the work is simple. All you have to do is apply the Klean-Strip Green Denatured Alcohol reasonably over all those scraps that were problematic in scraping and let the solvent be over them for a few minutes.
Subsequently, when 15-20 minutes have lapsed, go back to scrapping the leftovers of the carpet padding. Now that the denatured alcohol has softened all the hardwood floor materials, scrapping will be much easier for you to conduct.
If the remains of the carpet padding still give you a hard time being removed, pour some more denatured alcohol over them and repeat the process until they are long gone.
Then use a mop or a cloth, whatever works more appropriately for you, to gather all the scrapes and dump them aside.
Step#4: Final Cleaning
We hope that you have fortunately removed the carpet padding and its glue from the hardwood, even if not all of the substances, and have successfully removed most of the sticky implications and remains of the old carpet padding.
Prepare a mixture of soapy water to do the final cleaning. You can use any detergent that does not contain a high saturation of chemicals but has all the chemicals in a balanced amount. We still do not want to risk damaging the hardwood floor!
Dilute your chosen detergent in a bucket full of water or until a soapy mixture is formed. Then, use a microfiber cloth, towel, or cloth made out of a suitable material to mop the hardwood floor.
Be thorough with the mopping and try to take advantage of every area. This is because even previously, if some glue was left on the wooden surface, through a deep and final cleanse that you are currently doing, all of it can be gone.
Moreover, remember not to let the wood soak in the soapy water mixture because it can indicate damage to the hardwood. Just dampen the wood, and once you finish the final cleanse using soapy water, wet a new cloth in clean water and wipe it over the surface. Then let the surface dry!